Talc powder FOB Bandar Abbas jumbo bag Packing LC payment

Talc powder FOB Bandar Abbas jumbo bag Packing LC payment

Talc Powder

Mining Plus Business Collection is the largest collection inside Iran that has experts in the field of mining. Our collection is dedicated to the best of the business in this field and has the full satisfaction of our customers to boost their business. Mining Plus products include barite, bentonite, silica, natural sulfur, talc, calcium carbonate, iron ore, dolomite and coal.

Talc powder FOB Bandar Abbas jumbo bag Packing LC payment

Physical properties of talc in supplementary form in some applications, the physical properties of talc are considered, and its chemical nature plays a minor role. An important criterion for the use of talc in industrial applications is as follows:

Crystal structure: Crystal talc may be fibrous or plate. When this material becomes abrasion, the talc crystals turn into a plate or flattened or fibrous state. This issue is dependent on the structure of this material.

Surface hardness and softness: Talc is the most soft minerals known and its hardness is 1 in Meuse scale. Its softness is such that it has a lizard or soap. Soapstone, due to the presence of impurities, is somewhat harder than pure talc. So, the use of soap stones is preferred in most applications.

Color and optical properties: Talc is in pure state, white to whiteish silver. This material has a pearly luster and has a refractive index of 1.54 to 1.59 and is resistant to ultraviolet radiation.

Density: Because of its softness, this material has a relatively high density and has a density of 2.4 tons per cubic meter. This is three times the density of the granite bulk.

Mechanical Properties: The thin plates of this material contain talc crystals. These pages, although flexible, have a limited elasticity. As a result, talc has high mechanical strength and, therefore, the structure of this material has a good stability.

Electrical properties: This material is a poor conductor of electricity and has high dielectric strength.
Absence of plasticity: This substance is a moisture absorbing material and therefore, when mixed with water, does not create a plastic mass. The nature of this material is due to its slippery surface.

Chemical Properties: Chemically, talc is a neutral substance (acid or gamma), and its chemical composition is 3MgO.4SiO_2.H_2O. It contains 63.5% silica, 31.7% magnesium oxide and 4.8% water.

Please contact us for more information and knowing the terms of sale.

Mining Plus is a leading producer in the coal industry

Mining Plus is a leading producer in the coal industry

What is coal? What is the origin of coal? How is oil and natural gas from coal produced?

A non-crystalline, combustible solid that changes from brown to light to black. The gloss is dark, the density is from 1 to 1.8, the hardness is 0.5 to 2.5, crunchy, the rugged surface to the shellfish. The coal is classified according to the degree and physical properties of their constituents. The coal is mainly made of carbon, oxygen, and hydrogen, which goes down to the high quality (anthracite), oxygen and hydrogen content. The existence of organic construction in charcoal and a series of well-known charcoal that begins with wood and ends in anthracite will not leave any doubt about the origin of the coal. Coal is a result of the biological changes caused by the increase in pressure and temperature rise on plants from very early days. Carbon in coal is condensed in various organic compounds, including carboxylic acids, and aromatic compounds with unpleasant rings (which in addition to carbon include hydrogen, oxygen, nitrogen, and sulfur).

Mining Plus is a leading producer in the coal industry

History

More than two thousand years ago, coal was used in China, Greece and Italy as a fuel. Of course, mining began in the tenth century in Germany.

The origin of coal

Today, it is clear that coal has a plant origin and has been formed over long chemical, biological, and geological processes in the past, and has become a valuable resource that mankind uses today. All of the coal has not been created in one way, but due to the different geologic periods and their different conditions, the type of changes in the production of coal has also varied. Hence, today there are several types of coal in mines.

Coal formation processes

Plant material consists essentially of three major elements of carbon, hydrogen, and oxygen, as well as a small amount of mineral and nitrogenous materials. The major part of plants is cellulose, the formula C6H10O5, which is converted into coal by various biochemical and geochemical processes.

Coal and oil formation

Coal comes from the remains of trees, shrubs and other living plants. The appearance of these plants took place in periods where the weather was mild and damp. A reciprocal rotation in the creation workshop may well capture what is called the energy crisis. The whole thing started in billions of years ago with the process of solar energy conversion to the ATV. Chlorophylls and other plant pigments use energy from the sun to convert carbon dioxide, water and minerals into oxygen and energy-enriched organic compounds, and provide food for small and large organisms, including humans. This process also increases the amount of organic mineral deposits, such as coal hydrocarbons, petroleum and natural gas.

Natural gas

Processes of forming coal types

Coal comes from the remains of trees, shrubs and other living plants. The appearance of these plants took place in periods where the weather was mild and damp. Although some of the coal mines 400 million years ago and during the Silurian human silhouette, the silvery man appeared in the third period of the first geology. The characteristic of this period is the emergence of drought plants. But most of these reserves are about 250 million years ago and in the upper and lower periods of the Carboniferous, carboniferous or carbonaceous periods, part of the time, which dates back to the end of the first geological period, beginning at about 345 million years ago ) Came into being.

Then, conditions for the growth of enormous tropical ferns and giant flowerless trees were provided in large swamps. These plants dropped into the marshes after drying and disappearing into the marshes, resulting in accelerated aerobic fission due to the release of oxygen. Vegetation became a slime-like substance called Peat. Pits were tight depending on the degree of corruption, some brown and sponge and some black. The sea advanced on such meetings and the mineral deposits sank to them. Pitt became dry and hard under pressure. And turned into coal pit (lignite or lignite, also known as brown coal).

The greater pressure and time of the time was the production of pitch coal, which every 6 meters thickened the initial settling of plants to 0.3 m of coal. Even the higher pressures caused by the crust of the earth formed a massive boom, the hardest and most profitable coal, the anthracite. The quality of coal is determined by the ratio of the amount of carbon stabilized to the moisture content and the volatile matter and the material that is converted into gas by heat.

The origin of oil and natural gas

With all the extensive efforts and time spent on exploration and exploitation of natural gas and oil, humans are still unaware of the source of these materials.

Some facts accepted in this case include:

Oil and gas were formed from compounds with biological (biological) pressures. Most porphyrin-containing oils contain a mixture of hydrocarbon compounds, either derived from chlorophylls or hemins of the red blood cell. Lipid (fats and waxes) creatures have provided a great source for the formation of oil and gas. It is possible that, in the current situation, oil-like hydrocarbons can be found in young marine sediments.

Mining Plus is the best producer of drilling barite powder in the Middle East

Mining Plus is the best producer of drilling barite powder in the Middle East

Barite Powder

This mineral is used in various industries. Due to the abundance of barite reserves in most parts of the world and its specific characteristics, this ore has found great application in various industries. Barite is mainly used as filler for drilling mud, rubber, fine paper, cabling, plasticisation, manufacturing and processing of rubber, painting, ceramic manufacturing, transparent glass manufacturing, Chinese manufacturing, cosmetics, white ink and lacquer, The construction of insulating clothes, brake pads, automobile piles, vacuum tubes, fireworks, explosives, alloys, radiation protection, fluorescent lamps, nuclear reactors, pharmaceuticals, and medicine are found.

Drilling fluid:
Quartz mineral barite is fairly soft, inert and completely inexpensive with a specific gravity of more than 4 g / cm 3 which can be used in drilling mud used in deep wells by rotating method to contain 40% of the constituent material. This user accounts for 95% of the consumption of barite. Barite is a vital mineral in the oil and gas drilling industry. According to the 1980s, about 90 percent of the world’s barite is consumed in drilling mud because barite due to its high specific gravity, ease of use during work, chemical neutrality, softness and suitability in terms of price, drilling mud Is used. The amount of consumed barite per km of drilling is reported to be 429 tons. This mineral is used to cool and lubricate drill bits, inner cover of wells, transferring materials from drilling into the ground and control abnormal pressures inside oil and gas wells. Tangibly increases the weight of the flower and causes the pebbles to float.

Mining Plus is the best producer of drilling barite powder in the Middle East
The highest consumption of barite is higher than 80% in drilling mud. High specific gravity, medium hardness, low chemicality, chemical neutrality, ease of transport, are among the factors that cause barite to be used as drilling mud. Barite accounts for about 40% of drilling mud. This flower is a mixture of water, clay and barite, which will vary according to the local conditions of the reservoir and the proportion of the ingredients forming the drilling mud. The specific weight of this flower should be 2.7. There are two main types of mud flush drilling mud, which are: water-based fluids (WWF) and oil-based fluids (OBM C).
In addition, there are two types of methane fluids from several compounds (SSMs) that have been reported in some cases. The choice of each of these fluids depends on the geological structure in the wellhead, the pressure of the organization, the low temperature of the pit and the depth of the well. Generally, the flower is pumped down from the bottom of the drill to the bottom of the well and poured into the bottom of the well to the bottom of the well and climbs through the space between the pipe and the well wall.

Gilsonite powder FOB Bandar Abbas jumbo bag Packing TT payment

Gilsonite powder FOB Bandar Abbas jumbo bag Packing TT payment

Gilsonite

Mining Plus Business Collection is the largest collection inside Iran that has experts in the field of mining. Our collection is dedicated to the best of the business in this field and has the full satisfaction of our customers to boost their business. Mining Plus products include barite, bentonite, silica, natural sulfur, talc, calcium carbonate, iron ore, dolomite and coal.

Gilsonite is a mineral that was discovered in the early 1860s, but by the mid-1880s it was unknown until Samuel H. Gilson introduced the substance as a waterproof coating for wooden and insulating columns for wire and cable. Gilsonite is a fragile material and can easily be converted into a dark brown powder.

In 2010, Ameri et al. Concluded in their paper that the addition of Gilsonite would increase the high and low bitumen performance temperature, and this trend continues with Gilsonite increase. Meanwhile, the average performance temperature is increased by increasing the amount of gilsonite, which is attributed to a higher fatigue coefficient at the same temperature. In 2012, the Iranian Ministry of Transport and Transportation’s Transportation Research Institute concluded that Gilsonite increased the temperature of high-performance bitumen as a result of a research project. Therefore, the high temperature performance of high pure bitumen can increase the shear strength of pure bitumen, especially in hot seasons, which is a factor in increasing the resistance to asphalt mixing. Additionally, adding Gilsonite to pure bitumen increases the hardness and m-value of the bitumen decreases, and the lower bitumen performance temperature increases.

Gilsonite FOB Bandar Abbas jumbo bag Packing TT payment

Trade group minerals Mining Plus, known as (MPG), as the original company in Iran for many years to separate active in the mining, production, sales and export of mineral raw materials and processed for granulation and micronized powder with the best quality possible. Each type of stone mines, specifically in the Region that has been provided is of high purity and processing factories are located in the same area so we can expended the lowest cost and highest quality services worthy of the dignity of your buyers provide, In some cases, the extent to which mines in neighboring countries such as Afghanistan reached To get your mission done the best conditions.

In this way the transport logistics operations that work sea, land and railway to the needs of buyers are responsible been able to deliver on time and easy access to the product in your country solve. MPG as an international company with mining plus minerals in the world is going to be more integrated into mining activities to continue and as a good reference mining and sale of mining activities concurrently update their research in order to better ideas for Foreign investment in Iran to take steps. Mining Plus commercial team consists of young people in Iran, capable and entrepreneurs in different areas of the mine and we are proud to host various companies to discuss business in Iran and visit our mines.

Please contact us for more information and knowing the terms of sale.

 

Gilsonite FOB Bandar Abbas jumbo bag Packing LC payment

Gilsonite FOB Bandar Abbas jumbo bag Packing LC payment

Gilsonite

Mining Plus Business Collection is the largest collection inside Iran that has experts in the field of mining. Our collection is dedicated to the best of the business in this field and has the full satisfaction of our customers to boost their business. Mining Plus products include barite, bentonite, silica, natural sulfur, talc, calcium carbonate, iron ore, dolomite and coal.

Gilsonite is a mineral that was discovered in the early 1860s, but by the mid-1880s it was unknown until Samuel H. Gilson introduced the substance as a waterproof coating for wooden and insulating columns for wire and cable. Gilsonite is a fragile material and can easily be converted into a dark brown powder.

In 2010, Ameri et al. Concluded in their paper that the addition of Gilsonite would increase the high and low bitumen performance temperature, and this trend continues with Gilsonite increase. Meanwhile, the average performance temperature is increased by increasing the amount of gilsonite, which is attributed to a higher fatigue coefficient at the same temperature. In 2012, the Iranian Ministry of Transport and Transportation’s Transportation Research Institute concluded that Gilsonite increased the temperature of high-performance bitumen as a result of a research project. Therefore, the high temperature performance of high pure bitumen can increase the shear strength of pure bitumen, especially in hot seasons, which is a factor in increasing the resistance to asphalt mixing. Additionally, adding Gilsonite to pure bitumen increases the hardness and m-value of the bitumen decreases, and the lower bitumen performance temperature increases.

Gilsonite FOB Bandar Abbas jumbo bag Packing LC payment

Trade group minerals Mining Plus, known as (MPG), as the original company in Iran for many years to separate active in the mining, production, sales and export of mineral raw materials and processed for granulation and micronized powder with the best quality possible. Each type of stone mines, specifically in the Region that has been provided is of high purity and processing factories are located in the same area so we can expended the lowest cost and highest quality services worthy of the dignity of your buyers provide, In some cases, the extent to which mines in neighboring countries such as Afghanistan reached To get your mission done the best conditions.

In this way the transport logistics operations that work sea, land and railway to the needs of buyers are responsible been able to deliver on time and easy access to the product in your country solve. MPG as an international company with mining plus minerals in the world is going to be more integrated into mining activities to continue and as a good reference mining and sale of mining activities concurrently update their research in order to better ideas for Foreign investment in Iran to take steps. Mining Plus commercial team consists of young people in Iran, capable and entrepreneurs in different areas of the mine and we are proud to host various companies to discuss business in Iran and visit our mines. Please contact us for more information and knowing the terms of sale.

largest selling white barite powder use oil drilling

largest selling white barite powder use oil drilling

What is barite?

Formula: BaSO4
Color: Rhinestone, white
Specific gravity: 4.5, 4.4, 4.3, 4.2, 4.1
System: Arthropod

This mineral crystallizes with the chemical formula BaSO4 and in the orthorhombic system. Another name for Heavy spar is white to light gray. It is a mineral opal with glassy gloss to shellfish, with a hardness of 2.5 to 3.5. Stranim and lead barium are substitutes.
Indicator Feature:
The minerals are high in density (in contrast to non-metallic minerals) with a specific gravity of 3.4 to 6.4.
Genesis:
This cane is relatively abundant. It is usually found in the form of waste mined in hydrothermal streaks along with silver ore deposits of copper, cobalt manganese and antimony. In calcareous streaks, it is accompanied by calcite. There are sandstones along with copper ores, and sometimes it is also found in sandstone cement.

largest selling white barite powder use oil drilling

usage:
The highest percentage of produced barite is used as drilling mud for drilling wells. This mud prevents the exhaust of gases during drilling and also causes the drill to cool down and helps to extract drilling from inside the well.
Source of Barium-Ready Chemicals:
In the form of crumbled and as coating and coating in the rubber. Chopped barite is used as a cement covering of underwater pipes in the transportation of oil and gas. In the digestive radiology, the patient is also given a barium sulfate.
The reason for naming it:
The Greek word is taken to mean heavy.

Sale Iranian bitumen (gilsonite) bulk jumbo bag

Sale Iranian bitumen (gilsonite) bulk jumbo bag

Gilsonite (Bitumen)

Some types of bitumen in nature, due to the gradual conversion of crude oil and evaporation of its volatile matter, have come about over many years. Such bitumen is called bitumen and its durability is more than oil tar. Such asphalon may be purely in nature (lake bitumen), such as Lake Behbahan, Iran, and the Thirinidad Lake of America, or extracted from mines (mineral tar). The bitumen is also called Uintaite.
One of the ways to determine the quality of bitumen is analysis. Bituminous analysis shows the quality, durability and application of bitumen in various industries.
In the bitumen analysis, several items including: lump color – powder color – softness point – moisture – permeability – ash – mesh – solubility – carbon content … are determined and measured. The ultimate goal, Mining Plus, is to produce standard and high quality products to satisfy domestic and export customers. Undoubtedly, in the value chain for each industrial product, the role of raw materials in the final quality and the creation of a highly competitive environment is evaluated and by having the proper and quality raw materials, the final consumers of the products will have higher satisfaction. Fortunately, our country is one of the countries that have mines of this bitumen and its range starts from Yazd, which gradually becomes weedy and in the provinces of Kermanshah and Ilam (especially in the Gilan-e-Gharb), it is greatly appreciated and gradually from Kurdistan to Iraqi Kurdistan And finally its streams end in the Turkish Kurdistan. Measuring and analyzing some of the important items on smithery is as follows.
Bituminous ash shows bitumen impurities and other important parameters in bituminous quality, but unfortunately, the less experienced buyer after the price inquiry, the reason for this difference in prices is that their response is very simple: the difference in other parameters of bitumen such as: Density, carbon, etc., which are important in determining the quality of Gilsonite. Certainly, these are also involved in determining their price, and in no way should these parameters be considered unimportant.
But the bitumen in the mines has almost a characteristic and the amount of gray mixed with it will make it high and low. For example, some ash is less than 5 percent bitumen, one of the best natural bitumen, and it reaches below ten, fifteen, twenty, thirty, and even below fifty percent, the better the ash mixed, the lower the bitumen quality. More important is separation, which is a hard stage and usually lowers the quality and price of bitumen.

The most important characteristics or properties of natural bitumen that can be used in different fields include:

Softening Point
Bitumen softness is the rate of bituminous resistance. As bituminous softening point is higher, bitumen has a higher temperature resistance and better application in tropical regions. The lower the bitumen smelting point, the bitumen has a lower temperature resistance, and in temperate and Cooler has more application.

 

Penetration
Degree of penetration, bitumen sensitivity to temperature changes and thus the relative hardness of bitumen is measured. Bitumen with a higher degree of penetration, soft soils, are used in cold regions, and the lower the penetration, bitumen is more intense in tropical regions.
Bitumen is suitable for bitumen that has good abstraction with oil bitumen and after mixing with oil bitumen it is possible to obtain a product that conforms to the standards of road bitumen. Previous experience has shown that such a bitumen should have a low melting point, high solubility in CS2 and low mineral inert ash.

Sale Iranian bitumen (gilsonite) bulk jumbo bag
Color: Black
Mesh: 200 to 50
Ash: 25% to 5%
Moisture Content: >% 2.5
Carbon, Hydrogen, Nitrogen, Sulfur and Bitumen Oxygen

Carbon and hydrogen:
The measurements of carbon and hydrogen levels of gilsonite are performed on very small samples, and therefore, an adequate test is required. The sample is completely burned in oxygen at 800 degrees Celsius. The combustion products pass through the warm copper oxide and convert all the remaining carbon and hydrogen into CO2 and H2O, respectively.

Nitrogen:
The amount of nitrogen in the bitumen is measured by the famous Kjeldahl method.

Sulfur:
Sulfur has various forms in bitumen. To measure total sulfur in bitumen, dissolve a bitter bitumen with a mixture of a portion of sodium carbonate-free water and two parts of dilute magnesium oxide and heat it.
To determine the amount of sulfur in the sulfur, which is in the form of sulfate, it dissolves the chloride acid and precipitates in the form of barium sulfate and weighs the resulting precipitate. The amount of organic sulfur will be obtained from the difference in total weight of sulfur and sulfur minerals.

Oxygen:
The amount of oxygen in the bitumen can not be measured directly by any reliable method. To determine the amount of this element, first all the components in the bitumen are carefully measured according to the above methods, and their total difference of 100 equals to the bitumen oxygen content.